Yuanyeled-Outdoor led lighting manufacturer in China, supply outdoor architecture lights products.
Language
Yuanyeled-Outdoor led lighting manufacturer in China, supply outdoor architecture lights products.
1. Ensure safety
Safety is the most important factor in this process, so start by turning off the power to avoid electric shock. Meanwhile, personal protective equipment such as goggles and gloves can protect you from electric shock. Before proceeding, make sure the driver is stable and follow the standard installation procedure. Above all, you can use a voltage tester for safety.
2. Mount the Fixture
The way you mount your LED lights will help you get the most efficiency and safety. Therefore, the first important step was to determine the right position, taking into account the desired line and lighting. Also, make sure the surface is hard and can hold the lights. Use a screwdriver to tighten the screws. It is important to make sure that you have a good grip on the flood lights and control the position for proper operation. You should understand that focus may vary for different uses, such as security enhancements, built environments, and street lighting.
3. Connect the Wiring
Use insulating tape to wrap the wiring several times to ensure that the wiring is secure and will not loosen. If the wire is directly connected to the screw, no additional tape is needed to secure it. Then return the connected wires to their original positions, then close the switch again and test the power supply. Turn on the light switch to check whether the wiring is successful.
4. Secure the Fixture
You need to protect the parts to improve visibility and brighten the light, and part replacements typically include adjustable parts like sensor heads and swivel brackets, as well as additional accessories like lens hoods and glare shields.
5. Test the Light
The last step is to make sure the light is producing the desired results. Also, pay attention to sensors and control systems any irregularities, dimness, and flickering. Finally, also test additional functions.
The tools required for installing lamps include ladders, screwdrivers, pencils, hammer drills, diagonal pliers, and tape. Making sure all the tools are ready is a key step in the installation of the luminaire.
After preparing all the necessary tools, the installation of the lamps can begin. First of all, the old lamp needs to be removed, and the power supply to the room must be cut off before removal to ensure safety.
And these tools can help you mount the lights efficiently.
1. Screw Driver
A screwdriver is a vital tool that smoothens several tasks, such as turning screws and handling electric wires. They are available in diverse options like flat-head and star screws for different uses. In general, the screwdriver is vital in the flood light installation process to help tighten the screws that hold the lights in place.
In the meantime, they can be helpful in promoting stability and durability. You must ensure the screwdriver you choose fits with the screw on your floodlight to ensure simplicity and reliability. Thus, check on the screwdriver’s size and type.
2. Wire Stripper & Tape
The wire stripper is vital for removing insulation from electrical wires precisely and safely for proper connection. On the other hand, the wire tape helps to insulate and protect wire connections. These two tools are critical for efficient and secure electrical flow. In addition, the tape prevents short circuits and boosts the durability of the light.
The wire tape shields the circuit from environmental factors such as moisture, providing an extra protection layer. Above all, these tools are crucial for avoiding electrical hazards and ensuring a durable lighting setup for your outdoor space.
3. Ladder
A ladder is essential to access elevated areas when setting up outdoor lighting. The ladder can help you access tall walls and roofs for comfortable and secure operations.
In any case, you must select a ladder with the right weight capacity, stability, and height. Also, you must ensure a stable surface when placing the ladder to allow safe installation.
4. Voltage Tester
The voltage tester is a critical handheld tool for testing electrical voltage presence. It can help you avoid electric shocks since it allows you to test an electrical circuit before contact. The tester is a convenient way to test for electrical current and avoid hazards.
Yuanyeled illumination is a world-class LED lighting product manufacturer for outdoor decoration lighting luminaires and intelligent control system. We aim to provides efficient, professional and reassuring lighting for our customers. Contact us directly and you will receive free quote of the LED outdoor lights.
Shenzhen Yuanyeled Co.,Ltd. is a professional company, was established in 2011 based in Shenzhen, China with over 10-year experience in LED lighting industry starting with LED encapsulation.
Copyright © 2025 Shenzhen Yuanyeled Co.,Ltd.
