How To Install Led Wall Light

Drill

Electric Tester

Impact Drill

Pliers

Plugs

Screwdriver

Screws

Step 1: The very first thing you ought to turn off the power. When installing any electrical appliance is to turn off the power source. Before starting any electrical work, it is essential to turn off the power to the area where you will be working. Locate the circuit breaker that controls the power to the outdoor wall light and turn it off. Use a voltage tester to double-check that no power is running to the circuit.

Step 2: Retrieve the Circuit Wires

Switch off the power supply at the circuit box for safety reasons. Reach inside the wall electrical box. Look for the circuit wires, which you will find in a cluster consisting of black, white, and copper wires. Separate these wires then remove some of the plastic insulation from the black and white wires using wire strippers. Take off about half an inch of the insulation.

Step 3: Attach the mounting bracket.

After removing the old fixture, you are going to find a wall plate the light and install the mounting bracket for the new fixture. Or if you are going to mount a new light you should drills a new holes first. The mounting bracket should be attached to the junction box in the wall using the screws provided. Make sure the mounting bracket is level before tightening the screws.

Step 4: Connect the Wires

Hold the new light fixture close to the wall electrical box. Connect the wires accordingly, white with white then black with black. Next, connect the green wire from the wall light fixture with the copper wire from the wall box. Twist together both ends of each pair of wires, using wire connectors to cover the connection point for each pair.

Step 5:  Mount the Wall Light Fixture

Fasten a waterproof gasket on the new light fixture. Put the connected wires back into the wall electrical box. If the fixture has a mounting plate, attach this to the wall box using screws. Get the new light fixture. Hold its base against the wall matching the screw holes in the fixture with those in the mounting plate or on the wall. With a screwdriver, fasten the screws firmly through the holes.

               

Step 6: Test the outdoor light.

Once everything is connected and secured, turn the power back on and test the light by turning on the light switch. If the light does not turn on, turn the power back off and double-check the wiring. If the wiring is correct, the led wall light fixture is properly grounded.

Step 7: Finish the installation.

If the outdoor lighting fixture works properly, it’s time to finish the installation. Use silicone caulking around the fixture to seal any gaps between the fixture and the wall. This will help prevent moisture from getting inside the landscape lighting and causing damage.

Best Led Outdoor Wall Lights are a one-way translucent lamp with a simple shape and adopted double-side light transmission cylindrical structure. It has simple appearance with easy installation method. It is a cost-effective lamp. The light source adopted Double Protection Encapsulation LED module, the LED module reaches IP65-68 waterproof protection grade. It has uniform lighting effect and far light projection distance. It is mainly applied to residential quarters, parks,hotels, corridors, outdoor patios and so on. The lamp is designed with on-off, DMX512,RDM, 0-10V, 1-10V， PWM, Dali, triac, zigbee, wifi, bluetooth  optional function. It can meet the requirements of stable light, suitable for a variety of outdoor environments.If you want to inquire for outdoor led wall lights, contact Yuanyeled, the best choice of outdoor wall lights factory manufacturer.

• Year Established
  --
• Business Type
  --
• Country / Region
  --
• Main Industry
  --
• Main Products
  --
• Enterprise Legal Person
  --
• Total Employees
  --
• Annual Output Value
  --
• Export Market
  --
• Cooperated Customers
  --